how to disable actice x blocker (internet explorer)

Please note that official support for this menu version has now ceased. There are still plenty of users, though, and the forum is still running. Some of our long-time users may be able to help you out.
Post Reply
darkcobalt
Beginner
Beginner
Posts: 3
Joined: Sun Mar 20, 2005 3:03 pm

how to disable actice x blocker (internet explorer)

Post by darkcobalt »

hi everybody!

does anybody know, how to disable the internet explorer sp2's active x-blocker (like the milonic index-site http://milonic.com)? 'cause menue gets loaded there without any troubles!

And i have another problem:
how to remove the milonic-button in the menue :?:


Thanx a lot in advance
darkcobalt
User avatar
Ruth
 Team
 Team
Posts: 8763
Joined: Thu May 15, 2003 5:02 am
Location: Yucaipa, CA
Contact:

Post by Ruth »

Hi,
CHECK here about removing the Milonic link.

As for the blocker, is this happening when you are on the web or on your desktop? Since the Milonic site works, I have to assume it's on the desktop. This is information about SP2
Microsoft created a Lockdown Zone to block all Active Content on pages that reside on your local hard drive. JavaScript and Flash will be blocked when you preview a local file - but the page will display normally when viewed on the internet. Microsoft did this to protect the lowest common denominator of users from malevolent content delivered via traded CDs, DVDs, and other portable media - or from files saved via the internet or e-mail to your local hard drive.

To enable viewing active content in files that are on your local hard drive:

In IE, Choose Internet Options - Advanced
Scroll down to the Security Heading
Check the option labeled: Allow active content to run in files on my computer. You can also check the box above this if you want to allow active content to run from CDs.
Restart Internet Explorer for the changes to take effect
That's all the information I found, hope that helps.

Ruth
darkcobalt
Beginner
Beginner
Posts: 3
Joined: Sun Mar 20, 2005 3:03 pm

hi. PULL UP

Post by darkcobalt »

which settings do i have to change, to pull up the menu instead of pull down??????

Code: Select all

/*
 Milonic DHTML Menu
 Written by Andy Woolley
 Copyright 2002 (c) Milonic Solutions. All Rights Reserved.
 

////////////////////////////////////
// Editable properties START here //
////////////////////////////////////

// Special effect string for IE5.5 or above please visit http://www.milonic.co.uk/menu/filters_sample.php for more filters
if(navigator.appVersion.indexOf("MSIE 6.0")>0)
{
	effect = "Fade(duration=1);Alpha(style=0,opacity=90);Shadow(color='#777777', Direction=135, Strength=5)"
}
else
{
	effect = "Shadow(color='#777777', Direction=135, Strength=5)" // Stop IE5.5 bug when using more than one filter
}


timegap=500				// The time delay for menus to remain visible
followspeed=5			// Follow Scrolling speed
followrate=40			// Follow Scrolling Rate
suboffset_top=0;		// Sub menu offset Top position 
suboffset_left=0;		// Sub menu offset Left position

style1=[				// style1 is an array of properties. You can have as many property arrays as you need. This means that menus can have their own style.
"#000000",					// Mouse Off Font Color
"#FFFFFF",				// Mouse Off Background Color
"#000000",				// Mouse On Font Color
"red",				// Mouse On Background Color
"#FFFFFF",				// Menu Border Color 
10,						// Font Size in pixels
"normal",				// Font Style (italic or normal)
"normal",					// Font Weight (bold or normal)
"Verdana, Arial",		// Font Name
3,						// Menu Item Padding
,			// Sub Menu Image (Leave this blank if not needed)
,						// 3D Border & Separator bar
"#FFFFFF",				// 3D High Color
"#FFFFFF",				// 3D Low Color
"#336699",				// Current Page Item Font Color (leave this blank to disable)
"#336699",				// Current Page Item Background Color (leave this blank to disable)
,			            // Top Bar image (Leave this blank to disable)
"FFFFFF",				// Menu Header Font Color (Leave blank if headers are not needed)
"#336699",				// Menu Header Background Color (Leave blank if headers are not needed)
]


addmenu(menu=[		// This is the array that contains your menu properties and details
"mainmenu",			// Menu Name - This is needed in order for the menu to be called
322,				// Menu Top - The Top position of the menu in pixels
,				    // Menu Left - The Left position of the menu in pixels
100,				// Menu Width - Menus width in pixels
0,					// Menu Border Width 
"left",				// Screen Position - here you can use "center" 
style1,				// Properties Array - this is set higher up, as above
1,					// Always Visible - allows the menu item to be visible at all time (1=on/0=off)
"center",				// Alignment - sets the menu elements text alignment, values valid here are: left, right or center
effect,				// Filter - Text variable for setting transitional effects on menu activation - see above for more info
0,					// Follow Scrolling - Tells the menu item to follow the user down the screen (visible at all times) (1=on/0=off)
1, 					// Horizontal Menu - Tells the menu to become horizontal instead of top to bottom style (1=on/0=off)
,					// Keep Alive - Keeps the menu visible until the user moves over another menu or clicks elsewhere on the page (1=on/0=off)
,					// Position of TOP sub image left:center:right
0,					// Set the Overall Width of Horizontal Menu to 100% and height to the specified amount (Leave blank to disable)
0,					// Right To Left - Used in Hebrew for example. (1=on/0=off)
0,					// Open the Menus OnClick - leave blank for OnMouseover (1=on/0=off)
,					// ID of the div you want to hide on MouseOver (useful for hiding form elements)
,					// Reserved for future use
,					// Reserved for future use
,					// Reserved for future use
,"Home","index.html",,"Back to the home page",1 // "Description Text", "URL", "Alternate URL", "Status", "Separator Bar"
,"Zur Person","show-menu=web design",,"",1
,"Service","show-menu=web tools",,"",1
,"Kommunikation","show-menu=generators",,"",1
,"Login","show-menu=graphics",,"",1



])

and so on
	
	
dumpmenus()
User avatar
Ruth
 Team
 Team
Posts: 8763
Joined: Thu May 15, 2003 5:02 am
Location: Yucaipa, CA
Contact:

Post by Ruth »

You seem to be using Version 3 of the menu. I am moving this post to that forum. Version 3 is no longer supported and hasn't been developed in years. Most of the volunteers here don't know much about how it works and/or haven't used it in years. As far as I remember, Version 3 has a right to left , but not a setting to make it open up.

Code: Select all

addmenu(menu=[      // This is the array that contains your menu properties and details 
It's in this section that you'd find that if it is available, but what I see here doesn't show anything about being able to open it up.

Can you not upgrade and use Milonic DHTML Menu Version 5? Do you have a url so we can see the layout, there may be other options.

Ruth
Post Reply