Menu Width a bit off

tepidarium · Post by **tepidarium** » Mon Jul 12, 2004 6:47 pm

Hi,

I upgraded to the newest version of Milonic Menu - 5.32 from version 5.23 - I have noticed that my menu width of 750 pixels- which I set by way of using itemwidth properties for each item was a bit short -about 3 pixels.

So, I looked at the Milonic Menu properties and saw there is now a "menuwidth" property. I set the Menuwidth to 750 pixels - but the menu actually becomes about 2 or three pixels over 752 or 753. I then set the Menu Width to 748px and now it is exactly 750px. Is there some reason for this...

is there a proper way to set menu width?

Here's the URL:
http://www.citytech.cuny.edu/menutest/menu.html

Thanks all!

Post by **Ruth** » Thu Jul 15, 2004 3:14 pm

Hi,
You have a border of 1px so that adds 2px to the width and to the height requiring the menuwidth to be given a 2px smaller width.

Ruth

tepidarium · Post by **tepidarium** » Wed Jul 21, 2004 5:55 pm

Hi Ruth,

Thank you for your response. I will check on this - I assume that something inthe menu configuration must have changed as the correct width was achieved wtih these settings before. I will let you know...thanks